High Performance Dust and Fume Extraction Technology
Reverse-Pulse Cleaning2.2 kW FanFloor And Wall MountingCarbon Filter For Odour RemovalCartridge Filters 20 m2 Total Filter AreaHeavy Duty Rubber Castor Wheels
Provision for 2 Fume Arms
Airflow 1500 m3/h to 2400 m3/h
The Polex e-MISSION Control™ Mobile Dust and Fume Extraction Unit has been designed to suit a wide range ofapplications. These units are ideally suited to continuous operation since the filters are continuously cleaned while in operation.
Polluted air enters through one or two inlets in the top casing and is directed through a baffle and then upwards through the cartridge filters. The larger dust particles drop out into the dust tray while the lighter and finer particles continue into the cartridge filters. The cleaned air then enters the clean-air chamber where the air tank and blow pipes are positioned. Compressed air is ejected through a solenoid valve which travels through the blow pipes and into the filters. The blast of air causes the dust to fall offthe filters and collect in the tray below. The cleaned air is then discharged to atmosphere through an activated carbon filter, or can be connected to discharge ductwork.
Antistatic Spun Bonded Polyester (optional PTFE)
Construction & Finish
1.2 mm thick folded mild steel construction, Powdercoated
Electric motor starter with start/stop push buttons and manual push-button for filter cleaning.
> View PDF