Polex™ Clean-Carbo Series
- Suitable for a range of applications
- High filtering efficiency
- Modular construction
- Easy filter removal
- 2,000m3/h to 30,000m3/h capacity
Description
The Clean-Carbo range of filters is for the filtering and deodorising of contaminated air, polluted by welding smoke, oil, gas, vapour and general fumes. The filter modules are connected according to air-flow requirments.
Operating Principle
The polluted air first enters the CLEAN section of the filter. Larger particule matter is filtered through the pre and main filter. Immediately following this, the pre-filltered air is further filtered through the CARBO section which is directly connected to the CLEAN section. The CARBO filter removes fumes and odours.
Construction
1.2mm thick Galvanised sheetmetal construction
Pre-Filter
Pre-Filter (synthetic resin primed polyester fibre).
Main-Filter
Glass fibre media
Carbon-Filter
Activated carbon
Applications
Welding exhaust systems, chemical fumes, paint odours, adhesive fumes etc.
| Model |
Overall Dimensions HxWxL (mm). HxW is inlet dimension |
Max Airflow (m3/h) |
| Clean-Carbo 21 |
700 x 350 x 1400 |
1,500 |
| Clean-Carbo 22 |
700 x 700 x 1400 |
3,000 |
| Clean-Carbo 42 |
1400 x 700 x 1400 |
6,000 |
| Clean-Carbo 62 |
2100 x 700 x 1400 |
9,000 |
| Clean-Carbo 82 |
2800 x 700 x 1400 |
12,000 |
| Clean-Carbo 102 |
3500 x 700 x 1400 |
15,000 |
| Clean-Carbo 44 |
1400 x 1400 x 1400 |
12,000 |
| Clean-Carbo 64 |
2100 x 1400 x 1400 |
18,000 |
| Clean-Carbo 84 |
2800 x 1400 x 1400 |
24,000 |
| Clean-Carbo 104 |
3500 x 1400 x 1400 |
30,000 |
Airflows in table are for welding applications only. For other applications, please contact Polex.
> View PDF
