Products & Services

MDC 3-9 PCTM 185kW

Reverse Pulse Catridge Dust Collector

MDC PC series is an intelligent dust collector that automatically and continuously self cleans its filter cartridges with a reverse pulse action. The MDC PC is available with airflow from 4,000 to 256,000 m3/h.

It has been designed in Australia by experienced engineers to suit Australian industry requirements for a dust collector that requires the minimum amount of labour and energy to operate.

The MDC PC is supplied standard with a Rotary Discharge Valve (or airlock) or a screw feeder for larger units. For the 3-9 PC, it is supplied with a screw feeder.

The MDC PC is supplied standard with a High Efficiency Clean Air Fan that produces around 25% more air than conventional Fans and saves on energy costs.

The Variable Speed Drive is an energy savings device that lowers and increases the power consumption of the fan motor when slide dampers are closed and opened.

Model MDC 3-9 PCTM 185 kW
Fan Motor 185 kW, 4 pole, 3 phase, 415 V, IP55, R90
Air Flow 118,440m3/h
Filter Area 2,808 m2
Filter Media Antistatic Spun Bonded Polyester with Carbon Impregnation
Screw Feeder 5.5 kW, 4 pole, 3 phase, 415 V C
Pulse Valves 18 @ 240 VAC
Height 6320 mm
Width 9225 mm (excluding fan)
Depth 3790 mm
Control Panel 185 kW VSD

Important note: Fires and dust explosions can be caused by various ignition sources including sparks and optimum dust concentrations etc. We recommend fitting dust collectors with explosion vents and locating them outside of buildings to reduce the risk of damage to property and personnel in the event of an explosion or fire.

> View PDF